Your home with this consumer unit
Consumer unit S · Standard · door: oak
- Solar PVInverter section and DC combiner box — in the spare space or in the PV version.Can be added
- Home batteryAdd the battery section together with solar PV.Can be added
- Electric carCharger circuit with a Type B RCD (residual current device) — in the EV version.Can be added
- Heat pumpAdd a dedicated heat pump circuit in the configurator.Can be added
Can be added — add it in the configurator. An illustration of what the consumer unit can do, not a measurement.
Consumer unit S · Standard · door: oak
Flat or small house up to about 80 m² with one kitchen — without solar PV or EV charger, replacing an old board with a new one with surge protection.
without solar PV or EV charger
PLN 2,435.40incl. 23% VAT · PLN 1,980.00 excl. VAT · excluding delivery
Delivery and installation in Poland only
Door finishes are new in our range — we will confirm the preliminary price when we check your order.
- 10 circuits
- 1 RCD and a T2 surge protection device
- 2 rows, 24 modules
Lead time: 5–10 working days from receipt of the deposit. Production starts after we check your order (usually 1 working day).
Product data sheet (PDF) — enclosure dimensions
Have a question about this product?Ask us — we reply within 1 working day
10 circuits. Circuits for sockets, lighting and appliances, 4-pole RCDs and a surge protection device. Enclosure S, 2 rows of DIN rail.
- Main switch, surge protection device, phase indicators, N/PE terminal bars9 mod.
- 4-pole residual current devices (RCDs) × 14 mod.
- Circuit breakers (MCBs) × 10 (sockets, lighting, appliances)10 mod.
- Door: oak—
- Enclosure
- S — surface-mounted, with door, 2 rows of DIN rail
- Enclosure dimensions
- 300 × 425 × 115 mm (W × H × D)
- Door
- Oak — Wood-effect veneer in natural oak.
- DIN modules
- 23 used of 24 (spare 1)
- Circuits
- 10 (max. 10 in this enclosure)
- Residual current devices (RCDs)
- 1 × 4-pole, 30 mA
- Surge protection device (SPD)
- T2
- Standard
- EN 61439-3 (PN-EN 61439-3), the enclosure and switchgear manufacturer's verified system
- Lead time
- 5–10 working days from the deposit
Wiring diagram
A single-line diagram of the consumer unit with device labels — for signing off the house, for your insurer and for any electrician who opens it in the future.
Circuit chart
A clear list of which breaker supplies which room or appliance. Stuck inside the door and supplied as a PDF.
Routine verification report
Test results: continuity of protective conductors, insulation resistance and RCD operation — to EN 61439-3 (PN-EN 61439-3).
EU declaration of conformity
The manufacturer’s document confirming compliance with the Low Voltage Directive and EN 61439-3.
24-month warranty
Covering workmanship and devices. The unit’s serial number identifies its documentation for 10 years.
Spare space for expansion
The configurator keeps 10% of the space free, so you can add a charger or battery without replacing the consumer unit.
Technical documents for the consumer unit (wiring diagram, test report) are issued in Polish, as required for products installed in Poland.
Collection — PLN 0
From our workshop in Warsaw, by appointment. 100% deposit when you order.
Courier delivery (Poland) — PLN 99 excl. VAT
The consumer unit is packed on a pallet or in a box, with the documents inside. Your electrician installs it.
Installation with board replacement and testing — PLN 1,490 excl. VAT within 50 km
Beyond that, PLN 2 per km each way. For installation in a residential building, VAT is 8% (we confirm this when we check your order) and the deposit is 50%.
Production starts after the check
Paying the deposit doesn't start production — first we check your supply capacity, network type and device models (usually 1 working day).