Home battery

Consumer unit for a home battery and backup power

A home battery needs its own section in the consumer unit and a decision on what should keep working during a power cut: selected circuits (fridge, boiler, internet) or the whole house. The configurator shows the difference in price and in the number of modules.

See the ready-made consumer unit Build from scratch in the configurator

Sound familiar?

A hybrid inverter with no protection on the house side.
During a grid outage the battery powers nothing, because there is no changeover arrangement.
The solar installer won’t touch the consumer unit — “that’s the electrician’s job”.

What's in this consumer unit

Home battery / hybrid inverter section with an isolator.
Selected circuits: a separate sub-board for critical circuits, fed from the backup output.
Whole house: a 63 A automatic transfer switch in a separate enclosure.
Solar PV inverter section and DC combiner box — if the installation is new.

Ready-made consumer unit for this situation

House with solar PV and a home battery

A house with solar panels and a battery, where the fridge, the boiler and the internet must keep working during a power cut.

Version XL60 of 72 modulesfits

ROW 1 · 12 mod.

ROW 2 · 12 mod.

ROW 3 · 12 mod.

ROW 4 · 12 mod.

ROW 5 · 12 mod.

ROW 6 · 12 mod.

Solar panels: inverter section and a box on the panel side
Home battery with backup power for selected circuits
Electric car charger section, 11 kW
18 circuits for sockets, lighting and appliances
4 four-pole residual current devices and a T1+T2 surge protection device

fromPLN 10,996.20incl. VAT · PLN 8,940.00 excl. VAT · excluding delivery

Customise

Indicative price based on the current price list, excluding delivery; we confirm it after verifying your installation. “Add to basket” adds the consumer unit to your order, “Customise” takes you to the configurator, where you can change every item.

Frequently asked questions

Selected circuits or the whole house?

Selected backup circuits (EPS) cost less and are enough for most homes: fridge, boiler, circulation pump, router and some of the lighting. The whole house (automatic transfer switch) makes sense with a large battery and an inverter that can handle the peak load.

Will it work with my inverter?

Tell us the model in the form — we check whether it has a backup output and which protection the manufacturer recommends. We design for your specific device.

Will I get the documents for a grant application?

Yes: the wiring diagram, circuit chart, test report and EU declaration of conformity. These are the documents required when the installation is signed off.

Didn't find an answer? Ask a question using the contact form — we reply within 1 working day.

Other situations

Consumer unit replacement

Consumer unit for a home battery and backup power

Sound familiar?

What's in this consumer unit

Ready-made consumer unit for this situation

House with solar PV and a home battery

Frequently asked questions

Other situations

Replacing your consumer unit — a new board, tested and certified

Consumer unit for an electric car charger

Consumer unit for a heat pump

Consumer unit for a new house — designed for the future

For electricians and installers — ready-made consumer units for your projects