Your home with this consumer unit
Consumer unit M · PV + EV
- Solar PVInverter section and DC combiner box (direct current from the panels).Ready
- Home batteryBattery section ready for a battery.Prepared
- Electric car11 kW charger circuit with a Type B RCD (residual current device).Ready
- Heat pumpAdd a dedicated heat pump circuit in the configurator.Can be added
Ready — the circuit and protection are in the consumer unit; Prepared — space in the consumer unit is waiting for the device; Can be added — add it in the configurator. An illustration of what the consumer unit can do, not a measurement.
Consumer unit M · PV + EV
Single-storey house up to about 150 m², with solar PV and an EV charger in one board.
PV — solar PV and EV — electric vehicle charger
PLN 9,901.50incl. 23% VAT · PLN 8,050.00 excl. VAT · excluding delivery
Delivery and installation in Poland only
- Solar PV: inverter, DC combiner box, battery
- 11 kW charger with a Type B RCD
- 16 circuits
Lead time: 5–10 working days from receipt of the deposit. Production starts after we check your order (usually 1 working day).
Product data sheet (PDF) — enclosure dimensions
Have a question about this product?Ask us — we reply within 1 working day
16 circuits. Solar PV (inverter section, DC combiner box, battery section) and an 11 kW charger with a Type B RCD. The devices don't fit in enclosure M, so the consumer unit is built in enclosure XL (6 rows of DIN rail) — the same number of circuits, more spare space.
- Main switch, surge protection device, phase indicators, N/PE terminal bars9 mod.
- 4-pole residual current devices (RCDs) × 416 mod.
- Circuit breakers (MCBs) × 16 (sockets, lighting, appliances)16 mod.
- Solar PV — inverter AC section3 mod.
- Solar PV — DC combiner box, 2 MPPTseparate enclosure: Solar PV — DC combiner box, 2 MPPT — IP65—
- Home battery — battery / hybrid inverter section3 mod.
- EV charging — 11 kW7 mod.
- Type B RCD for the charger—
- Enclosure
- XL — surface-mounted, with door, 6 rows of DIN rail
- Enclosure dimensions
- 300 × 925 × 115 mm (W × H × D)
- DIN modules
- 54 used of 72 (spare 18)
- Circuits
- 16 (max. 40 in this enclosure)
- Residual current devices (RCDs)
- 4 × 4-pole, 30 mA
- Surge protection device (SPD)
- T1+T2
- EV charger
- 11 kW, dedicated circuit, Type B RCD
- Solar PV
- inverter section (AC), DC combiner box on the panel side (separate IP65 enclosure)
- Home battery
- battery / hybrid inverter section — ready for a battery
- Additional enclosures
- Solar PV — DC combiner box, 2 MPPT — IP65
- Standard
- EN 61439-3 (PN-EN 61439-3), the enclosure and switchgear manufacturer's verified system
- Lead time
- 5–10 working days from the deposit
Wiring diagram
A single-line diagram of the consumer unit with device labels — for signing off the house, for your insurer and for any electrician who opens it in the future.
Circuit chart
A clear list of which breaker supplies which room or appliance. Stuck inside the door and supplied as a PDF.
Routine verification report
Test results: continuity of protective conductors, insulation resistance and RCD operation — to EN 61439-3 (PN-EN 61439-3).
EU declaration of conformity
The manufacturer’s document confirming compliance with the Low Voltage Directive and EN 61439-3.
24-month warranty
Covering workmanship and devices. The unit’s serial number identifies its documentation for 10 years.
Spare space for expansion
The configurator keeps 10% of the space free, so you can add a charger or battery without replacing the consumer unit.
Technical documents for the consumer unit (wiring diagram, test report) are issued in Polish, as required for products installed in Poland.
Collection — PLN 0
From our workshop in Warsaw, by appointment. 100% deposit when you order.
Courier delivery (Poland) — PLN 99 excl. VAT
The consumer unit is packed on a pallet or in a box, with the documents inside. Your electrician installs it.
Installation with board replacement and testing — PLN 1,490 excl. VAT within 50 km
Beyond that, PLN 2 per km each way. For installation in a residential building, VAT is 8% (we confirm this when we check your order) and the deposit is 50%.
Production starts after the check
Paying the deposit doesn't start production — first we check your supply capacity, network type and device models (usually 1 working day).