Your home with this consumer unit
Consumer unit L · Standard · flush-mounted · door: tinted glass
- Solar PVInverter section and DC combiner box — in the spare space or in the PV version.Can be added
- Home batteryAdd the battery section together with solar PV.Can be added
- Electric carCharger circuit with a Type B RCD (residual current device) — in the EV version.Can be added
- Heat pumpAdd a dedicated heat pump circuit in the configurator.Can be added
Can be added — add it in the configurator. An illustration of what the consumer unit can do, not a measurement.
Consumer unit L · Standard · flush-mounted · door: tinted glass
Two-storey house or a house of 150–250 m² — separate circuits for each floor, the garage and the garden — without solar PV or EV charger, replacing an old board with a new one with surge protection.
without solar PV or EV charger
PLN 5,412.00incl. 23% VAT · PLN 4,400.00 excl. VAT · excluding delivery
Delivery and installation in Poland only
The flush-mounted enclosure is new in our range — we will confirm the preliminary price when we check your order.
- 22 circuits
- 3 RCDs and a T1+T2 surge protection device
- 4 rows, 48 modules
Lead time: 5–10 working days from receipt of the deposit. Production starts after we check your order (usually 1 working day). Building a house? At checkout you can choose staged delivery: the back box first, before plastering, and the devices later.
Product data sheet (PDF) — dimensions and wall opening
Have a question about this product?Ask us — we reply within 1 working day
22 circuits. Circuits for sockets, lighting and appliances, 4-pole RCDs and a surge protection device. Enclosure L, 4 rows of DIN rail.
- Main switch, surge protection device, phase indicators, N/PE terminal bars9 mod.
- 4-pole residual current devices (RCDs) × 312 mod.
- Circuit breakers (MCBs) × 22 (sockets, lighting, appliances)22 mod.
- Flush-mounted enclosure (back box for building into the wall, frame with door)—
- Door: tinted glass—
- Enclosure
- L — flush-mounted (back box for building into the wall, frame with door), 4 rows of DIN rail
- Wall opening
- 320 × 695 mm (W × H), recess depth 100 mm
- Minimum wall thickness
- 120 mm
- Frame with door
- 350 × 725 mm — visible on the wall
- Door
- Tinted glass — White frame with tinted glass — you can see the LEDs and device status without opening the door.
- DIN modules
- 43 used of 48 (spare 5)
- Circuits
- 22 (max. 26 in this enclosure)
- Residual current devices (RCDs)
- 3 × 4-pole, 30 mA
- Surge protection device (SPD)
- T1+T2
- Standard
- EN 61439-3 (PN-EN 61439-3), the enclosure and switchgear manufacturer's verified system
- Lead time
- 5–10 working days from the deposit
Wiring diagram
A single-line diagram of the consumer unit with device labels — for signing off the house, for your insurer and for any electrician who opens it in the future.
Circuit chart
A clear list of which breaker supplies which room or appliance. Stuck inside the door and supplied as a PDF.
Routine verification report
Test results: continuity of protective conductors, insulation resistance and RCD operation — to EN 61439-3 (PN-EN 61439-3).
EU declaration of conformity
The manufacturer’s document confirming compliance with the Low Voltage Directive and EN 61439-3.
24-month warranty
Covering workmanship and devices. The unit’s serial number identifies its documentation for 10 years.
Spare space for expansion
The configurator keeps 10% of the space free, so you can add a charger or battery without replacing the consumer unit.
Technical documents for the consumer unit (wiring diagram, test report) are issued in Polish, as required for products installed in Poland.
Collection — PLN 0
From our workshop in Warsaw, by appointment. 100% deposit when you order.
Courier delivery (Poland) — PLN 99 excl. VAT
The consumer unit is packed on a pallet or in a box, with the documents inside. Your electrician installs it.
Installation with board replacement and testing — PLN 1,490 excl. VAT within 50 km
Beyond that, PLN 2 per km each way. For installation in a residential building, VAT is 8% (we confirm this when we check your order) and the deposit is 50%.
Production starts after the check
Paying the deposit doesn't start production — first we check your supply capacity, network type and device models (usually 1 working day).